1 Formula How Brass Plating

          Can be plated onto metal surfaces directly. Without primer coating with nickel. And the solution does not contain cyanide compounds which are dangerous.

Ingredients plating solution.

- Salt brass (Brass Salt).

- Ammonium chloride

- mix with water.

Plating 

          The temptation is to use brass. The use of copper, brass containing 60% to 40% zinc plating is soft. For the dark treatment. Available in brass with a mixture of zinc, copper 70% and 30%. 

          Joining parts of the cathode. Brass for the lure to the anode. 

          6-10 V voltage. 

          Power consumption of about 4-6 amps. 

          Temperature treatment. To be effective must be done at temperatures around 20 ° C. 

          After treatment and wash parts, clean immediately. Brass surface that will tarnish over time. 

Steps to perform in brass plating.

          - Smooth polished specimens.

          - Cleaning by hot alkali.

          - Wash

          - Specimens immersed in acid Sulfur 5%.

          - Wash

          - Plated brass 1-5 minutes.

          - Wash

          - Dip each solution turbidity

          - Wash

          -Clear water.

          - Coated with lacquer (if desired).

          - Drying.

• #Problem - A stain works by binding with the copper wire.
• #Problem - Alkaline copper plating over the plated surface is dark.
• #Problem - Plated copper with dark skin and coarse granular
• #Problem -The alkaline copper plating does not work?
• Bell of lost wax casting.
• Brush plating & Dip in Tank.
• Coating and Hardening.
• How to determine the percentage of gold.
• How We Seal GPC Gold Potassium Cyanide.
• How We Seal Liquid Plating Product